diff options
Diffstat (limited to 'locale/template.txt')
| -rw-r--r-- | locale/template.txt | 359 |
1 files changed, 359 insertions, 0 deletions
diff --git a/locale/template.txt b/locale/template.txt new file mode 100644 index 0000000..023ea26 --- /dev/null +++ b/locale/template.txt @@ -0,0 +1,359 @@ +# textdomain: celevator +Elevator Up Call Button= +Elevator Down Call Button= +Elevator Up and Down Call Buttons= +Elevator Call Button (on state - you hacker you!)= +Error reading car information!@nPlease remove and replace this node.= +Controller/dispatcher is missing!@nPlease remove and replace this node.= +Controller/dispatcher found but with incorrect ID!@nPlease remove and replace this node.= +Car (part @1 - you hacker you!)= +You don't have access to these switches.= +Really remove this car?= +Yes= +No= +Car-top Inspection Box, Off State (you hacker you!)= +Car-top Inspection Box, On State (you hacker you!)= +Glass-Back Elevator Car= +Metal Elevator Car= +Metal Glass-Back Elevator Car= +Basic Elevator Car= +Can't place car here - position @1m to the right, @2m up, and @3m back is blocked!= +Can't place car here - position @1m to the right, @2m up, and @3m back is protected!= +Places a car call at the specified landing on the specified elevator= +<car ID> <landing number>= +Invalid car ID= +Invalid landing number= +No such car or car info is missing= +Controller is missing= +Controller found but with wrong ID= +Controller is protected= +Command sent= +Places an up hall call at the specified landing on the specified elevator or dispatcher= +Dispatcher is missing= +Dispatcher found but with wrong ID= +Dispatcher is protected= +Places a down hall call at the specified landing on the specified elevator or dispatcher= +View the status of the specified elevator= +<car ID>= +Failed to load controller memory= +Reload celevator controller firmware from disk= +Elevator Controller= +Controller (door open - you hacker you!)= +Controller (top section - you hacker you!)= +Controller (top section, car in motion - you hacker you!)= +Controller (top section, open - you hacker you!)= +Controller (top section, open, car in motion - you hacker you!)= +Door Open Timeout= +Door Close Timeout= +Lost Communication With Drive= +Drive Not Configured= +Drive Metadata Load Failure= +Drive Origin Invalid= +Attempted to Move Doors With Car in Motion= +Target Position Out of Bounds= +Hoist Machine Missing= +Drive<->Machine ID Mismatch= +Controller<->Drive ID Mismatch= +Welcome to your new MTronic XT elevator controller!= +This setup wizard is designed to get your elevator up and running as quickly as possible.= +This applies to the whole celevator mod, not just this controller:= +Select a group operation mode:= +Simplex= +This will be the only elevator in the group. Hall calls will be handled by this controller.= +Group= +This elevator will participate in a group with others. Hall calls will be handled by a dispatcher.= +Waiting for connection from dispatcher...= +This controller's car ID is: @1= +Enter details of all floors this elevator will serve, then press Done.= +CAR STATUS= +Fault History= +Edit Parameters= +FAULT= +INSP/ACCESS= +NORMAL OPERATION= +UP= +DRIVE CMD= +DOWN= +HIGH SPEED= +DOOR ZONE= +DOORS LOCKED= +RUN= +STOP= +CAPTURE= +TEST= +INSPECT= +NORMAL= +UP = +DOWN = +EDIT PARAMETERS= +Door Dwell Timer= +Contract Speed (m/s)= +Inspection Speed (m/s)= +Main Egress Landing= +Nudging Timer= +Alternate Recall Landing= +Reset Doors= +Reset Controller= +Car Call Security= +FAULT HISTORY= +Clear= +CAR CALL SECURITY= +Authorized Users Only= +Locked= +Security Disabled= +Allow Swing Calls When Not In Swing Operation= +Unlock in Independent= +Extra Allowed Users= +Main landing cannot be locked= +ID @1: Floor @2 - @3 - @4= +Call@nCancel= +HOLD= +FIRE SVC= +IND SVC= +CAR LIGHT= +CAR FAN= +Please select a floor:= +Please use elevator= +ERROR= +Could not find a suitable elevator= +Please try again later= +Elevator Destination Entry Kiosk= +Elevator Elastomeric Buffer= +Elevator Oil-Filled Buffer= +Elevator Oil-Filled Buffer (top half - you hacker you!)= +Elevator Guide Rail= +Elevator Guide Rail with Bracket= +Elevator Positioning System Tape= +Elevator Positioning System Tape with Magnets= +Elevator Positioning System Tape with Bracket= +Elevator Positioning System Tapehead (off, you hacker you!)= +Elevator Positioning System Tapehead (ULM on, you hacker you!)= +Elevator Positioning System Tapehead (ULM and DZ on, you hacker you!)= +Elevator Positioning System Tapehead (ULM, DLM, and DZ on, you hacker you!)= +Elevator Positioning System Tapehead (DLM and DZ on, you hacker you!)= +Elevator Positioning System Tapehead (DLM on, you hacker you!)= +Elevator Digilines Input/Output= +Channel= +Elevator Digilines Multi-Car Input/Output= +You need either the 'protection_bypass' or 'server' privilege to use this.= +Elevator Dispatcher= +Dispatcher (door open - you hacker you!)= +Dispatcher (top section - you hacker you!)= +Dispatcher (top section, open - you hacker you!)= +Firmware reloaded successfully= +Can't place cabinet - no room for the top half!= +Can't place cabinet - top half is protected!= +Hold the sneak button while digging to remove.= +Can't open cabinet - cabinet is locked.= +Welcome to your new MTronic XT elevator dispatcher!= +Before continuing, make sure you have at least two controllers in group operation mode and ready to connect.= +This applies to the whole celevator mod, not just this dispatcher:= +Enter details of all floors this group will serve, then press Next.= +Include all floors served by any car in the group, even if not served by all cars.= +Connect to each car in the group, then click Done.= +EDIT CONNECTIONS= +Car @1 - ID #@2= +Remove Connection= +Enter the car ID and select the floors served (click them to toggle), then click Connect.= +You must select at least two floors.= +Connect= +YES= +NO= +Car ID: @1= +Connecting to controller...= +Connection timed out!= +Make sure the car ID is correct and@nthat the controller is ready to connect.= +GROUP DISPLAY= +Menu= +MAIN MENU= +Edit Connections= +Press Next to begin.= +License Info= +Next >= +< Back= +Done= +EDIT FLOOR TABLE= +@1 - Height: @2 - PI: @3= +New Floor= +Edit Floor= +Remove Floor= +The Floor Height is the distance (in meters/nodes) from the floor level of this floor to the floor level of the next floor.= +(not used at the highest floor)= +The Floor Name is how the floor will be displayed on the position indicators.= +Editing Floor @1= +Floor Height= +Floor Name= +Edit Floor Table= +Back= +No Connections= +New Connection= +Edit Connection= +NEW CONNECTION= +EDIT CONNECTION= +ID: @1= +CAR @1= + IN= +OUT= +OK= +Move Up= +Move Down= +Glass Hoistway Door (fast, bottom - you hacker you!)= +Glass Hoistway Door (fast, middle - you hacker you!)= +Glass Hoistway Door (fast, top - you hacker you!)= +Glass Hoistway Door (slow, bottom - you hacker you!)= +Glass Hoistway Door (slow, middle - you hacker you!)= +Glass Hoistway Door (slow, top - you hacker you!)= +Steel Hoistway Door (fast, bottom - you hacker you!)= +Steel Hoistway Door (fast, middle - you hacker you!)= +Steel Hoistway Door (fast, top - you hacker you!)= +Steel Hoistway Door (slow, bottom - you hacker you!)= +Steel Hoistway Door (slow, middle - you hacker you!)= +Steel Hoistway Door (slow, top - you hacker you!)= +Hoistway Door Open-State Placeholder (you hacker you!)= +Glass Elevator Hoistway Door= +Can't place door here - position @1m to the right and @2m up is blocked!= +Can't place door here - position @1m to the right and @2m up is protected!= +Steel Elevator Hoistway Door= +Hoistway Door Sill, Single Track (you hacker you!)= +Hoistway Door Sill, Double Track (you hacker you!)= +Elevator Drive= +Normal entity-based drive= +Drive - Running: Up, @1m/s - Position: @2m= +Drive - Running: Down, @1m/s - Position: @2m= +Drive - Running (simulated): Up, @1m/s - Position: @2m= +Drive - Running (simulated): Down, @1m/s - Position: @2m= +Drive - Idle= +Using car with origin @1= +No car found! Punch to try again= +Elevator Hoist Machine= +Can't place machine here - no room for the motor (to the left)!= +Can't place machine here - space for the motor (to the left) is protected!= +Can't place machine here - no room for the sheave (in front)!= +Can't place machine here - space for the sheave (in front) is protected!= +Hoist Motor (you hacker you!)= +Sheave (you hacker you!)= +Centered Sheave (you hacker you!)= +Null Drive= +Simulation only, no movement, for testing and demonstration= +Null Drive - Running: Up, @1m/s - Position: @2m= +Null Drive - Running: Down, @1m/s - Position: @2m= +Null Drive - Idle= +Elevator Fire Service Phase 1 Keyswitch= +Elevator Fire Service Phase 1 Keyswitch (on state - you hacker you!)= +Elevator Fire Service Phase 1 Keyswitch (reset state - you hacker you!)= +Elevator Fire Service Phase 1 Keyswitch (lit - you hacker you!)= +Elevator Fire Service Phase 1 Keyswitch (on state, lit - you hacker you!)= +Elevator Fire Service Phase 1 Keyswitch (reset state, lit - you hacker you!)= +Can't connect to a controller/dispatcher you don't have access to.= +You don't have a key for this switch.= +Elevator Keyswitch= +Elevator Keyswitch (maintained, off state - you hacker you!)= +Elevator Keyswitch (maintained, on state - you hacker you!)= +Elevator Keyswitch (momentary, off state - you hacker you!)= +Elevator Keyswitch (momentary, on state - you hacker you!)= +(none)= +ON= +OFF= +Elevator Governor= +Governor Sheave (you hacker you!)= +Remote interface for MTronic XT elevator controllers= +This application requires a hard disk drive.= +Welcome to the mView remote interface for MTronic XT elevator controllers!= +Add a connection to get started.= +Add/Edit Connections= +MANAGE CONNECTIONS= +ID @1 - @2= +Delete Connection= +Connect >= +Please enter the ID you would like to connect to and a name for the connection.= +ID= +Name= +Error= +Could not find a controller or dispatcher with the given ID.= +Please check the ID number and try again.= +Controller or dispatcher is protected.= +Connected to @1 (ID @2)= +Disconnect= +Uninitialized= +Position Sync - Floor= +Position Sync - Terminal= +Machine Room Inspection= +Car Top Inspection= +Fire Service - Phase 1= +Fire Service - Phase 2= +Fire Service - Phase 2 Hold= +Captured= +Test Mode= +Cancel= +CAR= +Follow Car= +Position: @1m Speed: @2m/s PI: @3= +Fault(s) Active= +No Current Faults= +Inspection (Any)= +Fire Service= +Fire Service Phase 1= +Fire Service Phase 2= +Moving Up= +Moving Down= +Moving (Any Direction)= +Collecting Up Calls= +Collecting Down Calls= +Car Light Switch= +Car Fan Switch= +Up Call Exists at Landing:= +Down Call Exists at Landing:= +Car Call Exists at Landing:= +Car at Landing:= +Moving to Landing:= +Elevator Mesecons Output= +Elevator Mesecons Output (on state - you hacker you!)= +Elevator Mesecons Input= +Elevator Mesecons Input (on state - you hacker you!)= +Car Call at Landing:= +Up Call (simplex car) at Landing:= +Down Call (simplex car) at Landing:= +Up Call (swing) at Landing:= +Down Call (swing) at Landing:= +Deactivate Fire Service Phase 1= +Activate Fire Service (main landing) Phase 1= +Activate Fire Service (alternate landing) Phase 1= +Machine Room or Hoistway Smoke Detector= +Lock Car Calls at Landing:= +Require Auth for Car Calls at Landing:= +Unlock Car Calls at Landing:= +Activate Swing Operation= +Deactivate Swing Operation= +Up Call at Landing:= +Down Call at Landing:= +Activate Fire Service Phase 1= +Controller= +Dispatcher= +Not all signal options require a landing number.= +Dispatcher: @1= +Car: @1= +Dispatcher ID= +Can't connect to a dispatcher you don't have access to.= +Can't connect to a controller you don't have access to.= +Normal Operation= +Fault= +Emergency Stop= +Independent Service= +Swing Operation= +Doors Opening= +Doors Open= +Doors Closing= +Doors Closed= +Elevator Position Indicator= +Elevator Up Lantern= +Elevator Up Lantern (vertical)= +Elevator Up Position Indicator / Lantern Combo= +Elevator Down Lantern= +Elevator Down Lantern (vertical)= +Elevator Down Position Indicator / Lantern Combo= +Elevator Up and Down Lantern= +Elevator Up and Down Lantern (vertical)= +Elevator Up and Down Position Indicator / Lantern Combo= +Car ID= +Save= +Landing Number= |