From d88a0595f7d083c7820569e17be0b281ffd9eb27 Mon Sep 17 00:00:00 2001 From: cheapie Date: Mon, 27 Apr 2020 13:35:21 -0500 Subject: Add true-color version --- README | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'README') diff --git a/README b/README index 1b042a0..df7488e 100644 --- a/README +++ b/README @@ -4,21 +4,17 @@ License: ---Code: WTFPL ---Textures: "white" image by VanessaE (WTFPL), "palette" image is from here: https://commons.wikimedia.org/wiki/File:256colour.png -Depends: mesecons_lightstone, digilines -(neither is in depends.txt since the order doesn't matter) +Depends: digilines +(should load without it but won't be real useful) Instructions: -* Grab one from the creative inventory, or craft one: - nothing green lightstone nothing - red lightstone luacontroller blue lightstone - nothing digiline nothing - * Place the thing * Right-click and set a channel * Send a digilines message to it on that channel with the color you want (choices listed below) -Colors available: Any 6-digit hex color, such as "FF0000", "#c0ffee", "123456"... (will be set to the nearest color available) +Colors available for 256-color version: Any 6-digit hex color, such as "FF0000", "#c0ffee", "123456"... (will be set to the nearest color available) +Colors available for true-color version: Any 6-digit hex color, all values are supported Group addressing mode: @@ -36,8 +32,8 @@ blue yellow send this: -{{"red","green"}, -{"blue","yellow"}} +{{"FF0000","00FF00"}, +{"0000FF","FFFF00"}} Note that if you are using group addressing mode, if there is an already-configured RGB lightstone node directly above the one you are setting up, punching the one you are setting up (or right-clicking and selecting the Auto-Fill option) will attempt to auto-fill it (incrementing the Y address) from the one above. -- cgit v1.2.3