From 784ba2e68ca534b4355ecc26509e53c214f13977 Mon Sep 17 00:00:00 2001
From: Vanessa Ezekowitz <vanessaezekowitz@gmail.com>
Date: Thu, 16 Feb 2017 17:05:50 -0500
Subject: update several mods and add a few
updated: blox, bobblocks, castle, homedecor, coloredwood, ilights, stainedglass, unifiedbricks
added: cheapie's rgblightstone, digistuff, unifiedmesecons, and solidcolor
---
rgblightstone/README | 43 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 rgblightstone/README
(limited to 'rgblightstone/README')
diff --git a/rgblightstone/README b/rgblightstone/README
new file mode 100644
index 0000000..1b042a0
--- /dev/null
+++ b/rgblightstone/README
@@ -0,0 +1,43 @@
+RGB Lightstones for Minetest
+
+License:
+---Code: WTFPL
+---Textures: "white" image by VanessaE (WTFPL), "palette" image is from here: https://commons.wikimedia.org/wiki/File:256colour.png
+
+Depends: mesecons_lightstone, digilines
+(neither is in depends.txt since the order doesn't matter)
+
+Instructions:
+
+* Grab one from the creative inventory, or craft one:
+ nothing green lightstone nothing
+ red lightstone luacontroller blue lightstone
+ nothing digiline nothing
+
+* Place the thing
+* Right-click and set a channel
+* Send a digilines message to it on that channel with the color you want (choices listed below)
+
+Colors available: Any 6-digit hex color, such as "FF0000", "#c0ffee", "123456"... (will be set to the nearest color available)
+
+Group addressing mode:
+
+If you are building something with large numbers of these things, set them all to the same channel, set X and Y addresses on each, and send nested tables (Y on the outside) with colors for all of them.
+For example, given this display:
+
+X=1 Y=1 X=2 Y=1
+
+X=1 Y=2 X=2 Y=2
+
+to make it show:
+
+red green
+blue yellow
+
+send this:
+
+{{"red","green"},
+{"blue","yellow"}}
+
+Note that if you are using group addressing mode, if there is an already-configured RGB lightstone node directly above the one you are setting up,
+punching the one you are setting up (or right-clicking and selecting the Auto-Fill option) will attempt to auto-fill it (incrementing the Y address) from the one above.
--
cgit v1.2.3