From 6281dc744dc3951234931a9f44c3bdd353f79df7 Mon Sep 17 00:00:00 2001 From: Vanessa Ezekowitz Date: Fri, 27 Oct 2017 15:13:31 -0400 Subject: updated boost cart, homedecor modpack, castles modpack, currency, farming-redo, maptools, mesecons, moreblocks, moreores, pipeworks, quartz --- castle_gates/doors.lua | 21 ++- castle_gates/gate_functions.lua | 20 ++- castle_gates/locale/it.po | 274 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 303 insertions(+), 12 deletions(-) create mode 100644 castle_gates/locale/it.po (limited to 'castle_gates') diff --git a/castle_gates/doors.lua b/castle_gates/doors.lua index 58e3e4f..886af3d 100644 --- a/castle_gates/doors.lua +++ b/castle_gates/doors.lua @@ -16,6 +16,21 @@ if minetest.get_modpath("doors") then {"default:tree", "default:tree"}, } }) + + local door_recipe + if minetest.get_modpath("xpanes") then + door_recipe = { + {"xpanes:jailbars_flat", "xpanes:jailbars_flat"}, + {"xpanes:jailbars_flat", "xpanes:jailbars_flat"}, + {"xpanes:jailbars_flat", "xpanes:jailbars_flat"}, + } + else + door_recipe = { + {"default:steel_ingot", ""}, + {"", "default:steel_ingot"}, + {"default:steel_ingot", ""}, + } + end doors.register("castle_gates:jail_door", { tiles = {{ name = "castle_door_jail.png", backface_culling = true }}, @@ -25,11 +40,7 @@ if minetest.get_modpath("doors") then groups = { cracky = 2, door = 1, flow_through = 1}, sound_open = "doors_steel_door_open", sound_close = "doors_steel_door_close", - recipe = { - {"castle_gates:jailbars", "castle_gates:jailbars"}, - {"castle_gates:jailbars", "castle_gates:jailbars"}, - {"castle_gates:jailbars", "castle_gates:jailbars"}, - } + recipe = door_recipe, }) minetest.register_alias("castle:oak_door_a", "castle_gates:oak_door_a") diff --git a/castle_gates/gate_functions.lua b/castle_gates/gate_functions.lua index 4a3c7f7..92150d3 100644 --- a/castle_gates/gate_functions.lua +++ b/castle_gates/gate_functions.lua @@ -153,9 +153,9 @@ local get_door_layout = function(pos, facedir, player) local test_node_def = minetest.registered_nodes[test_node.name] can_slide_to:set_pos(test_pos, test_node_def.buildable_to == true) - if test_node_def.paramtype2 == "facedir" then + if test_node_def.paramtype2 == "facedir" then -- prospective door nodes need to be of type facedir local test_node_dirs = get_dirs(test_node.param2) - local coplanar = vector.equals(test_node_dirs.back, door.directions.back) + local coplanar = vector.equals(test_node_dirs.back, door.directions.back) -- the "back" vector needs to point in the same direction as the rest of the door if castle_gate_group_value == nil and test_node_def.groups.castle_gate ~= nil then castle_gate_group_value = test_node_def.groups.castle_gate -- read the group value from the first gate node encountered @@ -163,17 +163,18 @@ local get_door_layout = function(pos, facedir, player) if coplanar and test_node_def.groups.castle_gate == castle_gate_group_value then local entry = {["pos"] = test_pos, ["node"] = test_node} - table.insert(door.all, entry) - if test_node_def._gate_hinge ~= nil then + table.insert(door.all, entry) -- it's definitely a gate node of some sort. + if test_node_def._gate_hinge ~= nil then -- it's a hinge type of node, need to do extra work local axis, placement = interpret_hinge(test_node_def._gate_hinge, test_pos, test_node_dirs) - if door.hinge == nil then + if door.hinge == nil then -- this is the first hinge we've encountered. door.hinge = {axis=axis, placement=placement} - elseif door.hinge.axis ~= axis then + door.directions = test_node_dirs -- force the door as a whole to use the same reference frame as the first hinge + elseif door.hinge.axis ~= axis then -- there was a previous hinge. Do they rotate on the same axis? return nil -- Misaligned hinge axes, door cannot rotate. else local axis_dir = {x=0, y=0, z=0} axis_dir[axis] = 1 - local displacement = vector.normalize(vector.subtract(placement, door.hinge.placement)) + local displacement = vector.normalize(vector.subtract(placement, door.hinge.placement)) -- check if this new hinge is displaced relative to the first hinge on any axis other than the rotation axis if not (vector.equals(displacement, axis_dir) or vector.equals(displacement, vector.multiply(axis_dir, -1))) then return nil -- Misaligned hinge offset, door cannot rotate. end @@ -251,10 +252,15 @@ local get_door_layout = function(pos, facedir, player) local swing_corner = {} -- the corner of the square "arc" that a Minetest gate swings through local scan_dir + minetest.debug(axis) + minetest.debug(backfront) + minetest.debug(leftright) swing_corner[axis] = door_node.pos[axis] swing_corner[backfront] = newpos[backfront] swing_corner[leftright] = door_node.pos[leftright] if not (vector.equals(newpos, swing_corner) or vector.equals(door_node.pos, swing_corner)) then -- we're right next to the hinge, no need for further testing + minetest.debug(dump(newpos)) + minetest.debug(dump(swing_corner)) scan_dir = vector.direction(newpos, swing_corner) -- get the direction from the new door position toward the swing corner repeat newpos = vector.add(newpos, scan_dir) -- we start with newpos on the destination node, which has already been tested. diff --git a/castle_gates/locale/it.po b/castle_gates/locale/it.po new file mode 100644 index 0000000..8b5a169 --- /dev/null +++ b/castle_gates/locale/it.po @@ -0,0 +1,274 @@ +# ITALIAN LOCALE FILE FOR THE CASTLE GATES MODULE +# Copyright (C) 2017 Philipbenr And DanDuncombe +# This file is distributed under the same license as the CASTLE GATES package. +# Hamlet , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: Castle Gates\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2017-03-01 23:41-0700\n" +"PO-Revision-Date: 2017-09-26 23:51+0100\n" +"Last-Translator: Hamlet \n" +"Language-Team: \n" +"Language: it\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"X-Generator: Poedit 1.6.10\n" + +#: doc.lua:11 +msgid "Heavy wooden bars designed to prevent entry even to siege equipment." +msgstr "" +"Pesanti sbarre di legno progettate per impedire l'accesso perfino " +"all'equipaggiamento da assedio." + +#: doc.lua:12 +msgid "" +"Place these bars in a structure together and they will slide as a unified " +"gate when clicked on." +msgstr "" +"Componete una struttura mettendo insieme queste sbarre ed esse scorreranno " +"come un'unica saracinesca quando ci si cliccherà sopra." + +#: doc.lua:14 +msgid "" +"The bottom edge of a portcullis gate, with knobs to lock securely into the " +"floor." +msgstr "" +"La parte inferiore di una saracinesca, con puntali per bloccarsi saldamente " +"nel pavimento." + +#: doc.lua:15 +msgid "" +"This block can be used to define the edge of a portcullius that meets up " +"with another gate, should you have an arrangement like that. Otherwise it's " +"just decorative." +msgstr "" +"Questo blocco può essere usato per definire l'estremità di una saracinesca " +"che si incontra con un'altra, se doveste avere una tale disposizione. " +"Altrimenti è solo decorativo." + +#: doc.lua:17 +msgid "A basic gate panel." +msgstr "Un pannello di base per cancelli, porte e portoni." + +#: doc.lua:18 +msgid "" +"This gate segment will move in unison with adjoining gate segments when " +"right-clicked." +msgstr "" +"Questo segmento si muoverà all'unisono con altri segmenti adiacenti quando " +"cliccato col tasto destro." + +#: doc.lua:20 +msgid "A gate panel with a defined edge." +msgstr "" +"Un pannello per cancelli, porte e portoni avente un'estremità definita." + +#: doc.lua:21 +msgid "" +"The darkened edge of this panel marks the edge of the gate it's a part of. " +"You can use these when building double doors to ensure the two parts swing " +"separately, for example. Note that edges aren't strictly necessary for gates " +"that stand alone." +msgstr "" +"L'estremità annerita di questo pannello contrassegna il bordo del cancello, " +"porta o portone di cui fa parte. Per esempio potete usarla quando costruite " +"doppi battenti per assicurarvi che le due parti ruotino separatamente. Si " +"noti che queste estremità non sono strettamente necessarie per cancelli, " +"porte e portoni a battente singolo." + +#: doc.lua:23 +msgid "A gate edge with a handle." +msgstr "Una estremità di cancello, porta o portone con una maniglia." + +#: doc.lua:24 +msgid "" +"The handle is basically decorative, a door this size can be swung by " +"clicking anywhere on it. But the darkened edge of this panel is useful for " +"defining the edge of a gate when it abuts a partner to the side." +msgstr "" +"Fondamentalmente la maniglia è decorativa, un cancello o porta di queste " +"dimensioni possono essere aperti cliccando un punto qualunque su di essi. Ma " +"il bordo annerito di questo pannello è utile per stabilire la fine di un " +"battente quando confina con un altro." + +#: doc.lua:26 +msgid "A hinged gate segment that allows a gate to swing." +msgstr "" +"Un segmento di cancello, porta o portone provvisto di un cardine che ne " +"consente la rotazione." + +#: doc.lua:27 +msgid "" +"If you have more than one hinge in your gate, make sure the hinges line up " +"correctly otherwise the gate will not be able to swing. The hinge is the " +"protruding block along the edge of the gate panel." +msgstr "" +"Se avete più di un cardine nel vostro cancello, porta o portone, accertatevi " +"che siano allineati correttamente altrimenti non potrà ruotare. Il cardine è " +"la protuberanza lungo il bordo del pannello." + +#: doc.lua:29 +msgid "A block with a slot to allow an adjacent sliding gate through." +msgstr "" +"Un blocco provvisto di una fessura per consentire a una porta scorrevole di " +"scivolarci attraverso." + +#: doc.lua:30 +msgid "" +"This block is designed to extend into a neighboring node that a sliding gate " +"passes through, to provide a tight seal for the gate to move through without " +"allowing anything else to squeeze in." +msgstr "" +"Questo blocco è progettato per estendersi in un nodo vicino attraverso cui " +"scivoli una porta scorrevole, per fornire una chiusura ermetica alla porta o " +"saracinesca che gli passa attraverso senza permettere a niente altro di " +"intrufolarvisi." + +#: doc.lua:32 +msgid "" +"A block that extends into an adjacent node to provide a tight seal for a " +"large gate." +msgstr "" +"Un blocco che si estende in un nodo adiacente per fornire una chiusura " +"ermetica per un portone." + +#: doc.lua:33 +msgid "" +"Two nodes cannot occupy the same space, but this block extends into a " +"neighboring node's space to allow for gates to form a tight seal. It can be " +"used with sliding gates or swinging gates." +msgstr "" +"Due nodi non possono occupare lo stesso spazio, ma questo blocco si estende " +"nello spazio di un nodo vicino per consentire a cancelli, porte, portoni e " +"saracinesche di formare una chiusura ermetica. Può essere usato con porte " +"scorrevoli o a rotazione." + +#: doc.lua:37 +msgid "Gates" +msgstr "Cancelli, porte, portoni e saracinesche" + +#: doc.lua:38 +msgid "" +"Gates are large multi-node constructions that swing on hinges or slide out " +"of the way when triggered." +msgstr "" +"Cancelli, porte, portoni e saracinesche sono costruzioni multi-nodo che " +"quando vengono attivate ruotano su dei cardini o scivolano via." + +#: doc.lua:43 +msgid "Gate construction" +msgstr "Costruzione di cancelli, porte, portoni e saracinesche" + +#: doc.lua:45 +msgid "" +"Gates are multi-node constructions, usually (though not always) consisting " +"of multiple node types that fit together into a unified whole. The " +"orientation of gate nodes is significant, so a screwdriver will be a helpful " +"tool when constructing gates.\n" +"\n" +"A gate's extent is determined by a \"flood fill\" operation. When you " +"trigger a gate block, all compatible neighboring blocks will be considered " +"part of the same structure and will move in unison. Only gate blocks that " +"are aligned with each other will be considered part of the same gate. If you " +"wish to build adjoining gates (for example, a large pair of double doors " +"that meet in the center) you'll need to make use of gate edge blocks to " +"prevent it all from being considered one big door. Note that if your gate " +"does not abut any other gates you don't actually need to define its edges " +"this way - you don't have to use edge blocks in this case.\n" +"\n" +"If a gate has no hinge nodes it will be considered a sliding gate. When " +"triggered, the gate code will search for a direction that the gate can slide " +"in and will move it in that direction at a rate of one block-length per " +"second. Once it reaches an obstruction it will stop, and when triggered " +"again it will try sliding in the opposite direction.\n" +"\n" +"If a gate has hinge nodes then triggering it will cause the gate to try " +"swinging around the hinge. If the gate has multiple hinges and they don't " +"line up properly the gate will be unable to move. Note that the gate can " +"only exist in 90-degree increments of orientation, but the gate still looks " +"for obstructions in the region it is swinging through and will not swing if " +"there's something in the way." +msgstr "" +"Cancelli, porte, portoni e saracinesche sono costruzioni multi-nodo, di " +"solito (anche se non sempre) costituite da molteplici tipi di nodi che si " +"uniscono in un tutt'uno. L'orientamento è importante, perciò un cacciavite " +"sarà uno strumento utile quando si costruiscono cancelli, porte, ecc.\n" +"\n" +"L'estensione di cancelli e simili è stabilita da un'operazione \"flood fill" +"\" (allagamento riempitivo). Quando attivate un blocco di cancello, tutte le " +"parti limitrofe compatibili verranno considerate parte della stessa " +"struttura e si muoveranno all'unisono. Solamente i blocchi che sono " +"allineati l'un l'altro saranno considerati come parte dello stesso cancello. " +"Se desiderate costruire cancelli confinanti (per esempio, un paio di grossi " +"battenti che si incontrano nel mezzo) dovrete fare uso dei blocchi-estremità " +"per impedire che il tutto sia considerato come un'unica grossa porta. Si " +"noti che se il vostro cancello non confina con nessun altro non avete la " +"necessità di definirne le estremità in questo modo - in questo caso non è " +"necessario che usiate blocchi-estremità.\n" +"\n" +"Se un cancello, ecc. non ha nodi coi cardini sarà considerato come " +"scorrevole. Quando attivato, il programma del cancello cercherà una " +"direzione in cui possa scivolare e lo muoverà in quella direzione al passo " +"della distanza di un nodo al secondo. Quando raggiungerà un ostacolo si " +"fermerà, e quando attivato ancora tenterà di scorrere nella direzione " +"opposta.\n" +"\n" +"Se un cancello, ecc. ha dei nodi coi cardini, attivandolo lo si farà ruotare " +"attorno al cardine. Se il cancello ha più cardini e questi non sono " +"allineati correttamente non riuscirà a muoversi. Si noti che il cancello può " +"svilupparsi solo in incrementi di 90° di orientamento, e controllerà la " +"presenza di ostacoli nella zona in cui ruota e non ruoterà se c'è qualcosa " +"di mezzo." + +#: doors.lua:8 +msgid "Oak Door" +msgstr "Porta di quercia" + +#: doors.lua:22 +msgid "Jail Door" +msgstr "Porta della prigione" + +#: doors.lua:43 +msgid "Jail Bars" +msgstr "Sbarre della prigione" + +#: gate_slots.lua:36 +msgid "Stonebrick" +msgstr "Mattoni di pietra" + +#: gate_slots.lua:45 +msgid "@1 Gate Slot" +msgstr "Alloggio di @1 per cancelli, porte, portoni e saracinesche" + +#: gate_slots.lua:70 +msgid "@1 Gate Slot Reverse" +msgstr "" +"Rovescio dell'alloggio di @1 per cancelli, porte, portoni e saracinesche." + +#: gates.lua:7 +msgid "Portcullis Bars" +msgstr "Sbarre della saracinesca" + +#: gates.lua:37 +msgid "Portcullis Bottom" +msgstr "Estremità inferiore della saracinesca" + +#: gates.lua:104 +msgid "Gate Door" +msgstr "Segmento di cancello, porta o portone" + +#: gates.lua:136 +msgid "Gate Door Edge" +msgstr "Estremità di cancello, porta o portone" + +#: gates.lua:175 +msgid "Gate Door With Handle" +msgstr "Cancello, porta o portone con maniglia" + +#: gates.lua:218 +msgid "Gate Door With Hinge" +msgstr "Cancello, porta o portone con cardine" -- cgit v1.2.3